Product Name: Mountain Bike 2 Piston Hydraulic Brake Model: HB-875E Color: black and red optional Power-off principle: Magnetic induction 2-pin power-off wire Tubing length: front 2300mm and rear 2300mm Material: aluminum alloy Weight: 818g. Without brake discs and tools.Brake disc size: 160 Fits handlebar diameter: 22mm Brake seat installation size: 51mm/74m. The above picture is the relevant dimensions of the brake handle. If you still have any unfamiliar dimensions, please contact customer service and we will measure the relevant dimensions for you! Please check the above dimensions carefully.
Under normal circumstances, mountain bikes are universal. Because the size and structure are not suitable, it is not a quality problem. Special attention is that this brake can only be adapted to the. Please note: This brake is only suitable for electric bicycles, electric scooters, etc. With the right brake disc, and cannot be installed on the left brake disc, which is very important!The way the brake handle cuts off the power is magnetic induction, and the connector of the power cord is a waterproof 2-pin structure with a length of about 200mm. The main material of the brake handle is aluminum alloy, which is refined by forging process. The appearance and texture of the polished and frosted anode are very good! The hydraulic brake lever is an integrated oil cylinder structure, which is durable and does not leak oil!
The picture above shows the red caliper, which is suitable for the right brake disc (the model with the left brake disc cannot be used). The length of the tubing is 2300mm, which can be cut according to your own needs.
The caliper has been filled with mineral oil! Warning: Before installing the brake disc, please do not remove the red blocking plate to empty the brake lever, otherwise it will cause oil leakage or damage to the oil disc! The pads used in the brake are compatible with M355. If you need to search for pads in the store, or contact customer service.
The caliper uses a universal oil pipe joint, which can adjust the direction angle of the oil pipe at will 360 degrees. The picture above is the tubing cutting and needle pressing tool, which is used when you cut the tubing and insert the oil needle. The picture above shows the original mineral oil of the NFOX factory.
For the maintenance of the brakes in the future, it is recommended to reserve it! The above picture is the power-off wire of the 1500mm SM-2A terminal connector, which is not standard.